10
Variation to standard installation:
If surrounds adjacent to shower enclosure are not designated a ‘”Wet Area”, we have provided
vertical seals for each side of the door (Regulating authorities will dictate requirements in your
region).
This required change must be understood
and applied at the outset.
VERTICAL DOOR SEALS
APPENDAGE PAGE
4-6MM
REQUIRES FINAL
ADJUSTMENT
6.5MM GAP
VERTICAL SEAL
ADJUST TOP SUPPORT GLASS BRACKET TO ACT AS A DOORSTOP
DIAGRAM 2
DETAILING OF SEAL AND SUPPORT GLASS BRACKET POSITION
A
- H
inge Gap: 3.5mm
B
- Door: 600mm
C
- Door to Return Panel Gap: 6.5mm
D
- Outer Floor Channel Points
A
C
B
D
D
DIAGRAM 1
1. Door gaps will be 4mm wider than
Option 1 to allow for the vertical seals.
2. Waterbar must measure 609mm.
•
ADJUST THE DOOR SO THE BUFFER
SEAL HAS A LITTLE FRICTION AGAINST
THE RETURN PANEL.
•
THIS “SEAL SET-UP” MEANS THE
DOOR OPENS OUT ONLY.
