LEET™
User
Manual
– Revision
1.7
I. Quick-Start-Guide (4/6)
7
D. Connection chart with Audio/Video-Receiver (AVR)
Connect LEET™ to AVR with supplied DVI to HDMI cable.
Plug cable into “primary dedicated DVI port” of your graphics card as explained on page 5 (Step 2B).
Connect AVR to TV with HDMI cable.
Connect AVR to speakers with speaker cables.
A. Ensure sufficient power
Depending on system configuration, your LEET™ may draw up to 1250 Watts under full load. Hence,
please make sure, your power outlet is ready for this amount of power draw.
B. Connect to surge protector
Protect your investment by connecting the LEET’s power cable to a surge protector.
This surge protector should be directly connected to the power outlet in the wall.
C. Avoid cable traps
Route the power cable and all other cables in a way that they won’t be walked on or tripped over.
E. Connection chart without Audio/Video-Receiver (AVR)
Connect LEET™ to AVR with supplied HDMI cable and DVI/HDMI adaptor.
Plug cable into “primary dedicated DVI port” of your graphics card as explained on page 5 (Step 2 B)
Connect LEET™ to speaker with optical S/PDIF or analog audio cables
HDMI
HDMI
Speaker Cables (Stereo/Surround)
HDMI
Optical S/PDIF or Analog Audio (Stereo/Surround)
Step 4 – Connecting the System
F. Important AVR and TV settings
Activate “HDMI pass-through” in your AVR settings
Activate “Game Mode” or “PC Mode” in your TV settings. If your TV does not have these settings, you
need to deactivate any picture processing options in your advanced TV settings (please see TV manual).
Failure to configure these settings will severely decrease your mouse responsiveness.
