Steiger Dynamics LEET, Руководство пользователя

Страница: 6 / 19

LEET™ User Manual – Revision 1.7
I. Quick-Start-Guide (3/6)
6
High performance systems like the LEET™ require proper system placement to assure safe operating
temperatures and solid system stability even under hours of heavy load. Please follow the instructions below.
A. Optimize airflow
 Ensure good air circulation and do not place into
closed furniture.

If you place your system in an AV-Rack or
under/in a desk, ensure proper air intake and
exhaust clearance for the fans and ventilation
holes on bottom, rear, and left side.
 Do not put system on carpet or soft surfaces
since they block air intakes on the bottom.
B. Keep away from water, heat, and dust
 Setup in dry area and avoid exposure to
water/rain and excessive humidity.

Do not use system as a drink holder or coaster.
 Avoid hot/warm areas like proximity to heaters.

Dust decreases system cooling performance,
hence avoid dusty areas.
C. Keep accessible
Keep system accessible to do any of the following:
 Gently clean system exterior and interior from
dust

Turn on light switch

Open/close optical drive
 Access front panel connectors

Access connectors on the back
D. Place front screen and IR receiver in sight

Place system in a way so you can easily see the
front screen for system monitoring parameters
and entertainment information.
 Also, the IR receiver on the front left needs to
be in line of sight to use the IR remote control.
E. Other considerations

Never push objects into the PC. This could cause
short circuits , liquid drain, shock and/or fire.

Keep juniors’ hands away.
 Keep system away from strong magnetic fields.

The system weighs up to 70 pounds. To avoid
injury, it should only be moved by a person with
a respective fitness level.
Step 3 – System Placement Considerations
Keep
clean
Keep
dry
Keep
cool
No
Kids
No
magnets
Rear
air intakes
Rear
air outtakes
Left air
outtakes
Bottom air
intakes
Airflow of custom built liquid cooling configuration
NOTE: Your airflow may differ depending on specific
system configuration – especially pre-sealed liquid
cooling configurations feature a different airflow.