Rail Runner LT
Rail Runner LT
– Operator’s Manual
15
3.4. Positioning on a curved track
Use
the
6
mm
hex
wrench
to
loosen
four
screws
(
1
, Fig.
8),
and
then
put
the
carriage on
the track. Rotate two roller brackets (
2
) to put the rollers into
the
grooves, and then set
the levers to ON (
3
). Next, move the carriage left or right and make sure that it moves
smoothly. Then, tighten the screws (
1
) and the knob (
4
).
Fig. 8.
Rotating the rollers for a curved track
1
2
2
3
4
