7
Follow these instructions to safely start your high pressure
washer.
5) Turn engine switch to the “On” position. Fig.9A.
6) Close the Choke lever (A) by moving the lever towards the left.
Fig.9B.
7) Pull recoil starter to start engine. Fig.9C. Pull recoil starter slowly
until resistance is felt, then pull rapidly to start engine. Repeat if
necessary.
8) Once engine starts, open choke lever by moving the lever towards
the right. Fig.9E.
9) If motor fails to start, repeat steps 3-9.
10) Press trigger. Fig.9D.
OPERATION
SPRAYING WATER & NOZZLE USAGE
This pressure washer comes with a stainless steel wand, its tip has a
quick connect coupler (A) Fig.10 to fit different nozzles. The spray
pattern is adjusted by installing the appropriate spray pattern nozzle
to the quick connect coupler. Five nozzles are included, 0
0
, 25
0
, 40
0
and a detergent nozzle. To install a nozzle to the quick connect
coupler, pull the coupler ring (B) backwards and insert the desired
nozzle (C), release the coupler ring to lock it in place.
A
B
C
nozzles
wand
