3
WATER SPRAY
Never direct the water spray towards ANY person, animal, electrical wiring or the pressure washer itself. Care
must be taken not to spray too close to the surface or damage could occur. Steele Products is not
responsible for damage caused during use.
HOT MUFFLER & HIGH PRESSURE HOSE
Do not touch the muffler as it becomes very hot during operation. Keep hose away from the hot muffler or it
may damage the hose. Do not use a damaged high pressure hose. Do not kink the high pressure hose.
KEEP HANDS AWAY
Do not touch the nozzle of the water spray during operation.
COLD WEATHER STARTS
Do not operate this pressure washer in temperatures below 50C. Before starting engine in cold weather, make
sure ice has not formed in any part of the equipment.
DETERGENTS
Only use recommended detergents for pressure washers.
PREVENT ACCIDENTAL WATER SPRAY
To prevent accidental water spray, the locking latch on the wand trigger should be placed in the locked position
when not in use.
PREVENT PUMP DAMAGE Do not run the pressure washer engine for more than 5 minutes without pressing
the wand trigger or damage to the pump may result.
Never let the machine run unless connected to the water supply and it is on. Never run caustic fluids or acid
through this machine.
SAFETY FEATURES
Thermal relief valve – The thermal relief valve protects the pump from overheating in case a nozzle becomes
clogged. This system should not be abused. Make every effort to prevent the pump from overheating.
Low-oil auto shut-off- This pressure washer engine is equipped with a low oil shut-off system. If the engine
oil level goes below the recommended oil level, the pressure washer engine will automatically shut-off. This
protects your engine and prevents operating without proper lubrication.
