Page 9 of 14
939500174 Rev B
End of Run Trim
Style No. C120ERT
1.
Once the transom structure and
skin assembly is complete, measure
the distance from the floor to the
ceiling track
.
2.
Cut the End of Run trim 5/8"
longer than the dimension found in
step 1.
3.
Stand the trim adjaqcent to the
end of the panel and mark the clip
locations on the back side.
4.
Slide the clips on to the trim from
the end to the proper position.
5.
Snap the trim on to the frame,
putting the cut end inside the ceiling
track.
Note:
Position the clips to best
support the trim based on the available
9
8
8
8
8
1.
5/8"
84"
66"
