Page 11 of 14
939500174 Rev B
T-Junction trim
Change of Height Trim
Style No. C78CTSJ
1.
Once the transom structure and
skin assembly is complete, measure
the distance from the frame top to the
ceiling track.
2.
Cut the T-trim 7/8" longer than the
dimension found in step 1.
3.
Measure the distance from the
frame top to the top of the trim holder
above.
4.
Secure the aligner bracket from
the bottom (uncut end) of the T-trim
1/16" greater than the dimension
found in step 3.
5.
Snap the T-trim on to the trim
holders, putting the cut end inside the
ceiling track.
Note:
The transom trim holder can be
mounted above or below the factory-
provided location by using the junction
bracket as a template and drilling two
(2) 9/64" diameter pilot holes.
Tip:
Position the transom trim holder
with item 15 to the best support the
trim.
1.
7/8"
1/16"
84"
66"
11
19
3
3
20
17
3.
1
2
1
1
4
2
1
3
TOP VIEW
TOP VIEW
