Page 12 of 14
939500174 Rev B
Style No. C78CLSJ
1.
Once the transom
structure and skin assembly
is complete, measure the
distance from the frame top
to the ceiling track.
2.
Cut the L-trim 7/8"
longer than the dimension
found in step 1.
3.
Measure the distance
from the floor to the frame
top.
4.
Cut the T-trim 1/16"
shorter than the dimension
found in step 3.
5.
Secure the aligner
bracket between the L and T
trim, putting the cut ends of
the trims at the floor and the
ceiling.
6.
Snap the trim on to the
trim holders.
Note:
The transom trim
holder can be mounted
above or below the factory-
provided location by using
the junction bracket as a
template and drilling two (2)
9/64" diameter pilot holes.
Tip:
Position the transom
trim holder with item 15 to
the best support the trim.
1.
3.
7/8"
84"
66"
11
17
18
3
1
2
3
L-Junction trim
Change of Height Trim
3
1
2
TOP VIEW
4
1
1
TOP VIEW
