Page 2 of 8
939500683 Rev E
1
Uncarton and layout parts on the floor.
A
B
C
D
H
Glossary
A. Infill Material
*
B. Tube Frame Assembly
C. Bow Support (2)
D. Bow Handle (2)
E. Infill Connector
F. Base Extrusion
G. 1/4-20 x 5/8 Flat Head Screw (2)
H. Foot Base
J. 1/4-20 x 1-1/2 Pan Head Screw
G
F
E
J
*
NOTE for customer supplied infill material:
Infill material thickness is limited to the range between
1/16" and 5/32".
The infill material must weigh less than or equal to
1.00 lbs. per square foot. For example, a 4' x 8' sheet of
infill material must be less than or equal to 32.0 lbs.
The Underwriters Laboratories flammability requirements in
the United States (when tested per ASTM E-84 for Surface
Flammability) must achieve a flame spread index of less
than 200 (less than or equal to 138 in Canada) and smoke
developed index of less than 450 (or be labeled per UL
requirements if smoke exceeds 450).
NOTE:
Glass (or other breakable material) or material with
sharp edges would not be appropriate infill materials.
