Page 5 of 24
939503312 R ev. A
Note: B efore beginning installation of flex-fit wall, lay down, position,
and connect baseboard utilities (refer to instruction No. 42651).
Connector Post to Flex-fit Wall Frame
1. R emove top cap and wall panels from flex-fit wall frame.
2. Apply urethane edge trim to mouse holes on each side connector post.
3. Position connector post over excess flex conduit in baseboard utility, if applicable.
4. Loosely attach connector post to flex-fit wall frame.
5. Install top cap of connector post.
®
3
2
4
(4) 5/16-24 x 3/8 hex head
(4) 2 x 2 square washers
Connector Post "A"
Flex-fit wall frame
Baseboard Utility
(will not be shown in this direction again,
for more information refer to installation
instruction No. 42651).
Opening allows
excess flex conduit
to store in
connector post.
Pull up and out to
remove panels from frame.
1
5
(4) plastic
christmas
tree clips
(1) screw,
1/4-20 x 3/4"
1
