Page 10 of 24
939503312 R ev. A
Install the Return Wall
1. R emove top cap as shown.
2. R emove tack panel and return wall panel from return wall frame.
3. Position base track under return wall frame.
4. Follow the procedure previously described on page 5
to install the return wall frame to connector post.
Note: Steps 5 through 9 apply only if a
roller screen is part of the installation.
5. R emove V-track.
6. Disconnect the back
vertical rail of rolling panel
by removing the bolt
above the lower wheel.
7. Slide roller screen
into return wall frame.
8. R eattach the back
vertical rail once the rolling
panel is past the cross
frame member.
9. Level return wall,
then level front roller
to frame.
®
4
7
7
Roller Screen
Level screen
up or down
9
5
Remove (2) screws
from each end
of V-Track
Top Cap
(2) screws each
end, 1/4-20 x 3/4
flat head socket
1
Position Base Track under Return Wall Frame
before attaching to connector post (level base
track with adjustable glide feet).
3
