Page 6 of 20
005720D Rev F
®
(a)
(e)
(d)
(c)
(b)
Locate pilot holes and place one (1) console mounting bracket assembly
onto underside of worksurface. Attach bracket using three (3) screws (a).
Slide console next to bracket and make sure threaded studs are inserted
into slot (b). Slide other console mounting bracket next to console making
sure holes in bracket are lined up with pilot holes on worksurface (c).
Secure bracket to worksurface using three (3) screws (d).
Secure brackets to each side of console using
two (2) nuts and two (2) flat washers (e).
13
SHOULDER
WASHER
CONSOLE
SHOULDER
WASHER
CONSOLE MOUNTING
BRACKET ASSEMBLY
SCREWS
SCREWS
FLAT WASHERS
AND NUTS
SLOT
