4.
Lower modesty panel into position
between pedestals, then install onto
worksurface.
A) Install connecting bolts into holes in the
worksurface.
B) Lower modesty panel into position.
C) Insert cam locks and secure with a
half turn.
5.
Make sure modesty panel is aligned
vertically, then secure to pedestals with
screws through holes drilled in step 2.
6.
Carefully turn assembly over and
adjust leveling glides as needed.
CONNECTING BOLT
4a
4b
4b
Be sure to use
this set of holes.
4c
(2) screws per pedestal,
# 10-12 x 1" pan head
5
Page 3 of 10
P/N 939500227
Doc # 108322 Rev J
