2/3 HEIGHT MODESTY PANEL
1.
Remove drawers (if any) from
pedestals.
2.
Drill (4) holes through pedestal
back panels in the approximate
locations shown.
3.
Fit finished back panels onto
pedestals as shown.
4.
Secure with (4) screws each
through holes drilled in step 2.
3
Locate finished back panels
flush with pedestal end panels
and centered side to side.
4
PEDESTALS SHOWN UPSIDE DOWN
(4) screws per pedestal,
#10 x 1-1/2" pan head.
3
1
REAR VIEW
Locate (4) holes
in stretchers in back
of pedestal as shown,
then drill through back
panel of pedestal.
2
To remove drawers
push lever
down
on one
side, and
up
on the other.
Page 6 of 10
P/N 939500227
Doc # 108322 Rev J
