Steel City 10-722, Руководство пользователя

Страница: 17 / 36

Page 17
◊ PIVOTING THE SAW CARRIAGE
1. Loosen the handle at bottom of the column and turn the
handwheel on front to clear the blade of the table.
2. Disconnect the cutter head from the return spring.
3. Loosen lock lever, then pull back the lock knob.
Eyelet
4. Using the graduated scale as a reference, pivot the
saw carriage to one of the standard pre-set angles and
release the lock knob. Then retighten the lock lever.
Lock lever
Lock knob
6. Make a kerf cut as explained in the previous section.
5. Tighten the lock lever.
◊ GUIDE
Depending on the cuts to be made, it will be necessary to
adjust the guide to a given depth. 3 positions are possible.
For rip cuts, refer to the
pictograms of the graduated rule.
For crosscuts, adjust depending on the angle of the blade
and thickness of the cutting material.