Steel City 10-722, Руководство пользователя

Страница: 15 / 36

Page 15
4. While lowering red handle, rotate the cutter head to the
right or left depending on which side the saw will be fed.
Release the handle once the blade is positioned
perpendicularely to the arm. Tighten the lock handle.
NOTE: It will be necessary to groove the table
1
⁄
8
”
(3 mm) depth. Reference is made to the informa-
tion provided above in the section on cutting the
kerf in the table saw.
◊ RIPPING
1. Loosen the handle at the bottom of the column and turn
the handwheel in the front to clear the blade from the
table.
3. Loosen the lock handle
Lock h
andle
Lock lever
Eyelet
2. Remove the eyelet cable assembly of the carriage
screw and loosen the lock lever.
◊ SAW CARRIAGE HEIGHT
Loosen the handle at the bottom of the column and turn the
handwheel in front. Retighten the lever.
◊ SAW CARRIAGE POSITION ON
THE ARM
Loosen the lock lever on the left side of the cutterhead and
move the carriage where you want. Lock the lever to
immobilise the saw carriage.
Lock lever
Feed on the left of the table Feed on the right of the table