8
∙
The appliance must not be operated using a timer or a separate
remote system!
∙
After using the appliance or if the appliance malfunctions, al-
ways pull out the plug.
∙
Never pull at the cord set. Do not chafe it over edges or squeeze
it.
∙
Keep the power supply cord away from hot parts.
∙
Never leave the appliance unattended when operating.
∙
Do not leave the appliance outdoors or in a damp area.
∙
Never immerse the appliance in water.
∙
Do not operate the appliance if it is damaged (for example if it
felt down).
∙
The manufacturer is not liable for damage occurred by using
the appliance in another way than described or if a mistake in
operating has been made.
∙
To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
∙
Caution!
The foil sealing strip becomes hot. Do not transport
until the equipment has cooled down.
∙
Disconnect plug from power supply when device is not in use.
∙
If an extension cable is being used, please ensure that children
do not pull on it and that it is not a potential tripping hazard.
∙
The device is not intended for continuous use, always allow to
cool between sealing operations.
Workspace:
Important:
Never put the device on or next to a hot surface (e.g. the rings of a
stove).
Always put the device on a surface that is level, stable, temperature-resistant and dry.
Keep it away from the edge of work surfaces so that it cannot fall off during use.
Before initial use:
∙
Wipe off the device with a damp towel.
∙
The sealing rings and the bag sealing bar must be clean and level, otherwise it will
not be possible to generate a vacuum.
