SteamOvap RES Series, Инструкция по установке и эксплуатации

Страница: 12 / 29

I N S T A L L A T I O N
General guidelines for Mounting
CAUTION. Risk of malfunction. steamOres steam humidifier must be levelled in X & Z
axis.
Installation on wall (with supplied mounting bracket)
1. steamOres is supplied with a wall mounting bracket
2. Make sure that wall structure and strength is appropriate to support the operating weight of the
steamOres team humidifier.
3. Mark the wall or support according to the mounting bracket holes location.
Make sure that the mounting bracket is levelled. Drill holes to the wall or support.
Figure 6 – Wall mounting installation
4. Use anchors of sufficient size, at least 1/4in [5mm]. Install the mounting bracket to the wall or
support.
Reconfirm that the mounting bracket is properly levelled.
5. Hung the steamOres steam humidifier onto the mounting bracket and install the 2 supplied
screws holding the steamOres humidifier onto the mounting bracket.
SteamOres humidifier can be installed directly onto the air ventilation duct in case this duct is not
vibrating or oscillating due to very high air velocity or unbalanced fan.
12