Welding may damage your body or others. Take protection during operation.
Only professionally trained technicians should install, set-up, operate,
maintain and repair the equipment.
Do not maintain or repair the machine when the machine is connected to
power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with
work and earth.
Ensure equipment is correctly installed. Earth the work or metal to be
welded according the operation manual.
Ensure equipment is operated in a safe position.
Fumes and gases can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid breathing
these fumes and gases.
Use sufficient ventilation and/or exhaust at the arc to keep fumes and gases
away from the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and hot welding material can easily go through small cracks
and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Have a fire extinguisher readily available.
Hot parts can cause burns.
Do not touch hot parts.
Use torch after cooling or use the welding blow lamp.
Personnel with a heart-pacemaker should keep away from the welding arc.
Rotating parts may be dangerous.
Keep clear of rotating parts (eg fan).
Keep machine parts in a safe position.
STEALTH DIGI-ARC 160LT
1. SAFETY
4
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
3
1.
SAFETY
Welding may damage your body or others, so please take protection measure in
operation.
Only ones who are trained professionally can install , debug, operate,
maintain and repair the equipment.
Do not maintain and repair the machine when the machine is connected
with power.
Electric shock can kill.
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical(earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous!
Welding may produce fumes and gases hazardous to health. Avoid
breathing these fumes and gases. When welding, keep your head out the
fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from
the breathing zone.
Welding sparks can cause fire or explosion.
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that
welding sparks and not materials from welding can easily go through small
cracks and openings to adjacent areas.
Do not weld enclosed tanks or containers.
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn.
Do not touch the hot parts.
Please use the torch after cooling or use the welding blow lamp.
The people with heart-pacemaker should be away from the welding arc.
Rotating parts may be dangerous.
Far away from rotating parts. (like fan)
Keep the parts of machine in the safe position.
Содержание Digi-Arc 160LT
Страница 1: ...Part No 9021H DIGI ARC 160LT OPERATOR S MANUAL ...
Страница 2: ...STEALTH DIGI ARC 160LT ...
Страница 12: ...STEALTH DIGI ARC 160LT 12 ...