7
Installation
For seat backs with two holes:
Place the seat back mount on the back of the seat and line up the center hole
on either side of the seat back mount with the holes in the seat. From the
front, insert the two M6 x 1 x 18 button head screws through the holes in the
seat back and through the mount. Thread the nylon lock nuts onto the screws
and tighten the mount to the back of the seat.
On seat backs with four threaded holes (image not shown):
Place the seat back mount on the back of the seat and line up the holes with
the threaded holes of the seat back. Use the M5 x 0.8 x 12mm button head
screws to secure the seat back mount to the seat back. Make sure the tips of
the screws do not protrude past the surface of the seat on the side opposite
the mount.
WARNING
An incorrect installation of UniLink headrest hardware or its accessories may
cause damage to the hardware and/or injury to the user.
CAUTION
Any connection must be secured with all included fasteners.
Use only the fasteners provided in the package.
The installation of alternate or additional parts to a wheelchair
could change its functional structure.
Thoroughly assess whether additional wheelchair safety features are
necessary to maintain chair stability and effectiveness.
