6
Set up a plan before beginning the installation.
This plan should take into account:
•
Where the
UniLink Headrest Hardware
will be placed, as well as applicable
attachments and accessories; and,
•
The amount of clearance necessary for other hardware and accessories.
Design & Function
Required Tools
Use the proper tools to install and adjust the
UniLink Headrest Hardware
to the
desired position for the user.
2mm (M2)
Hex Wrench
4mm (M4)
Hex Wrench
11mm
Wrench
Included Fasteners
The seat back mount will be packaged with the following fasteners:
•
Two M6x1x18mm Button Head Screws with M6 nylon lock nuts; and,
•
Four M5x0.8x12mm Button Head Screws for mounting to seat backs with threaded
holes.
This selection of screws should accommodate your installation needs. If you have
trouble with the installation of the seat back mount, or have a question outside the
scope of this manual, please contact your supplier, or call us at the numbers listed
on the inside cover.
CAUTION
The use of improper tools may cause damage to the device.
Insufficient tightening of fasteners may lead to discomfort
for the user or component failure.
