Stealth Products Multi Joystick, Руководство пользователя

Страница: 19 / 36

R-net Settings 11.0
12
R-net Setup 11.1
For mo-Vis R-net joysticks to operate properly, some R-net parameters need to be set. For
information about R-net parameters, please refer to the Curtiss-Wright manual SK77981-14 | R-net
Technical Manual | Chapter 3 -- Programming .
- R-net Profile Management > Input Device Type (Ch. 3 - 4.4): In most cases, this parameter needs to
be set to Universal for all mo-Vis joysticks. In combination with certain other devices, it is advised to
set this parameter to JSM. Please refer to the installation manual of the other devices for more
information.
- R-net Controls > Global > Profile Button (Ch. 3 - 7.5): The default setting for this parameter is Profiles .
To access the control modes for other wheelchair functions, such as seating positions, select Profiles/
Modes .
R-net Further Setup 11.2
With the R-net PC Programming software, you can fine-tune joystick performance and functionalities
such as:
▪ Joystick Throw
JOYSTICK THROW
Throw, as it relates to joystick operation, is the position of a joystick, relative to its default (center)
position, when it is stopped in a particular direction.
Throw distance , then, is the maximum distance a
joystick shaft can be moved in any particular direction.
As it relates to programming, throw will correlate to the speed at which the wheelchair will move in a
given direction; a joystick thrown maximally in a direction will cause the chair to move in that direction
at its maximum speed.
When calibrating a joystick, its throw should be set to the maximum distance the user is capable of
moving the joystick shaft so that the user's full efforts correspond with the chair's maximum speed
output, i.e. a setting of 50% will correspond to full throttle at half the joystick's throw distance.