18
R-net™ Setup
Axis Orientation
The
Axis Orientation
parameter allows you to switch the axis definitions.
For
example, the X-axis (
Forward/Reverse
) can be switched, making the rear of the
chair the
Forward
direction, and vice versa. This allows joysticks to be installed in
any position necessary and correspond with the proper direction of movement of
the chair.
Active Orientation
▪
Plug in the R-net™ Programming Dongle in line with the Omni Display and the chair's
electronics. Turn on the chair's power.
▪
Press the
Mode
bu�on un�l you reach the
OBP
(Onboard Programming) menu. The
OBP
menu will appear as an hourglass while loading.
▪
With the naviga�on bu�ons, navigate to
Controls.
Press the
Right
bu�on to select it.
▪
With the naviga�on bu�ons, navigate to
Joys�ck.
Press the
Right
bu�on to select it.
▪
Select
Ac�ve Orienta�on
from the list and press the
Right
bu�on. Select the profile you
wish to edit..
▪
Follow the on-screen instruc�ons.
▪
Power cycle the chair.
Orientation Details
The
Orientation Details
option is similar to the
Throw Details
option, but it sets the
direction of proportional controllers listed in each profile. Values are set to
Yes
or
No
for invert Forward/Reverse (
InvFR
) or Left/Right (
InvLR
). To swap axes, change
value on
SWAP
row either
Yes
or
No
. Power cycle the chair.
