Stealth Cam STC-SNX1, Инструкция по эксплуатации

Страница: 17 / 45

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
17
Setting the Camera’s Resolution in PIR operation mode:
Your Stealth Cam can be programmed to 3 different resolutions,
High (3 Stars-­‐8Mp), Low (2 Stars–3Mp), Base (1 Star–1.3Mp).
•
Switch the camera to the ON position.
Ø
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
•
The word CAMERA and the STARS will be blinking.
•
Press the [OK] button ONCE to choose the selection.
•
Press the [UP] or [DN] button to select the desired resolution.
•
Press [OK] to save your selection.
•
Press [MENU] button to exit.
Setting the IR emitter selection:
This camera is equipped with an IR control toggle switch. Make sure
camera is in the OFF position before making any changes.
•
54 IR – Full illumination. Ideal for subject matter beyond 20ft.
•
36 IR – Reduced illumination. Good for use when subject is 20ft
or closer.