Stealth Cam STC-SNX1, Инструкция по эксплуатации

Страница: 24 / 45

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
24
Setting the Time Lapse Mode:
The Time Lapse Default setting value is from 18:00 to 8:00 the next
day. When the camera is set to time-­‐lapse mode, the program setting
will bypass any PIR activation. Instead, the user can set the program
for a pre-­‐determined time period [such as 6:00 to 18:00]. The user
then sets the frequency of pictures only (NOT videos) during this time
period [such as one picture every 10 seconds]. The camera will remain
in Time Lapse mode until the user has changed the program setting.
•
Switch the camera to the ON position.
Ø LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
Press [UP] button until you see the
word tLS blinking.
•
Press [OK] to confirm and go into TLS
Mode "Start Time" setting.
•
The display will show TIME + S 88:88
(S = Start, 88:88 = time in HH:MM)
•
Press [OK] to set the “Start Time”
setting. At this point you can adjust the
time from 00:00 to 23:59.