Stealth Cam STC-SNX1, Инструкция по эксплуатации

Страница: 25 / 45

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
25
•
The MINUTE digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the minute value
(00 – 59).
•
Press [OK] to save your selection and enter Hour setting.
•
The HOUR digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the hour value
(00 – 23).
•
Press [OK] to save the “Start Time” setting and move to the “ End
Time ” setting.
•
After completing the start time setting,
camera will go into TLS Mode "End Time"
setting.
•
The display will show TIME + E 88:88
(E = End, 88:88 = time in HH:MM)
•
At this point you can adjust the time from 00:00 to 23:59 by
pressing the [UP/DN/OK] buttons same as Start Time settings.
•
Press [OK] to save the “End Time” settings and move directly to
the TIME OUT setting.
•
Please complete the TIME OUT, Still image resolution, Burst Mode,
Zoom settings like the settings on the PIR operation mode.
•
Then press [MENU] button to exit.
EXAMPLE:
#1: If a user selected the Time Lapse mode, and set the start time from
08:00 and end time at 20:30, and then selected the timeout to be