Steadicam ARCHER2, Руководство по эксплуатации

Страница: 5 / 36

5
Overview
The Tiffen Company takes great pride in producing the
Steadicam
®
Archer
2™ . We are committed to excellence, innovation and
service, and the Archer
2
is a system that will evolve with you. Each component of the Archer
2
is carefully designed so the operator
can easily configure the Steadicam to the best possible advantage for each shot.
Tool free —
Our guarantee that all the advanced features can be used under real-world, fast-paced conditions.
Modular design —
We designed the Archer
2
to be easily modified, upgraded, maintained, and serviced.
The optional, position-sensing, super strong, motorized stage
increases the precision and repeatability of every shot.
Stage positioning is smooth and effortless, and operators can trim the sled’s balance while shooting. “Go-to” buttons on the remote
rebalance the sled to pre-determine positions — and return “home” — with just one touch.
The integral tilt head
tilts +/– 15º to preserve dynamic balance, to maintain high or low lens height, to help with clearance,
reach, or viewing problems, or to execute precise whip pans with the lens angled up or down.
The new, Wide Dovetail Lock
has a broader, more positive grip on the dovetail plate. The handle has a safety stop to prevent
accidental release.
The Archer
2
gimbal
has been meticulously engineered to provide a smooth precise feel incorporating high precision bearings
and a quick release ergonomically recessed clamp mechanism for fast adjustments.
Two section, carbon fiber telescoping post
extends the sled from 23 to 34 inches (58-86cm) — or anywhere in between —
for short to long mode shooting.
The swept-back monitor mount
is designed for maximum stiffness, inertial control and viewing options. It has a wider range
of positions, both vertically and horizontally and is uniquely designed to safely fold up for transport or storage.
The Archer
2
standard 7 inch LCD monitor
is state of the art. It’s a daylight viewable (700 nits)16x9 composite monitor,
with a frame line generator. The optional HDSDI (and composite) monitor is 7”, 16x9, and 400 nits. The optional UltraBrite 2 ™
monitor is 8.4” at an astonishing 1400 nits brightness, with advanced AR coating, and HDSDI, HD component, and analog
composite direct input. Its unique design lets it run cool without a fan.
The connector rich sled design
incorporates 3x HD quality video feeds from the top stage to sled base to accommodate
RGB or any other video configuration. Main BNC composite video input, 3x 12/24V power connectors, 12V/Video connector
for transmitters, monitor connector and tally connector are some of the other available connectors on the sled.
Structural Dovetail Base —
solidly mount gyros, extra batteries, balance weights or other accessories.
Steadicam PowerCube
™
dual battery pack
provides 220 watt hours and high amperage discharge — plenty of power for
the sled and today’s power hungry 35mm and High Def video cameras. The Archer
2
is a 12 and 24V volt system that uses either a
single or dual PowerCube or Anton Bauer ® batteries. The new tilting battery mount creates more options for balancing and inertial
control and also uniquely folds up for compact storage or transport.
The LX vest
is lightweight and ergonomic, working perfectly with the new generation of G-series arms.
The G–40 arm
is amazing, lifting from 12 to 40 pounds (5.4 to 18.1kg). This next generation of the G-Series arms provides
a smooth Iso-elastic ™ ride and incorporates a unique quick link mechanism to separate the arm sections for compact storage or
transport. With an astounding boom range of 29 inches (74cm), and interchangeable arm post with rotational drag control,
the G-40 arm gets the job done.
All the features are integral to the design; ready to be used when you need them.
The Archer
2
continues our tradition of building the world’s most versatile and user-friendly Steadicams.