stayer FH230 Скачать руководство пользователя страница 20

Страница: 20 / 20

Safety warnings specific for wire brushing
operations

Be aware that wire bristles are thrown by the brush
even during ordinary operation.

Do not overstress the

wires by applying excessive load to the brush. The wire
bristles can easily penetrate light clothing and/or skin.

If the use of a guard is recommended for wire
brushing, do not allow any interference of the wire
wheel or brush with the guard.

Wire wheel or brush

may expand in diameter due to work load and centrifugal
forces.

Additional safety warnings

Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility
company for assistance.

Contact with electric lines can

lead to fire and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line causes
property damage or may cause an electric shock.

Release the On/Off switch and set it to the off
position when the power supply is interrupted, e. g.,
in case of a power failure or when the mains plug is
pulled.

This prevents uncontrolled restarting.

When working stone, use dust extraction. The
vacuum cleaner must be approved for the extraction
of stone dust.

Using this equipment reduces dust-

related hazards.

Use a cutting guide when cutting stone.

Without

sideward guidance, the cutting disc can jam and cause
kickback.

When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.

The power tool is guided more secure with both

hands.

Keep your workplace clean.

Blends of materials are

particularly dangerous. Dust from light alloys can burn or
explode.

Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug
when the cable is damaged while working.

Damaged

cables increase the risk of an electric shock.

3. Machine-specific Safety Warnings

3.1. Placing or fixing the tool

Read all safety warnings and all
instructions.

Failure to follow the warnings

and instructions may result in electric shock,
fire and/or serious injury.

ENGLISH

Secure the workpiece.

A workpiece clamped with

clamping devices or in a vice is held more secure than by
hand.

3.2. Assembling

Mounting the Protective Devices

Before any work on the machine itself, pull the mains
plug.

Protection Guard for Sanding

Place the protection guard

onto the spindle collar of the

machine until the encoding keys of the protection guard
agree with the spindle collar. Press and hold the release
lever

while doing this.

Press the protection guard

onto the spindle collar until

the shoulder of the protection guard is seated against the
flange of the machine, and turn the protection guard until it
can clearly be heard to engage.

Adjust the position of the protection guard

to the

requirements of the work process. For this, press the
release lever

upward and turn the protection guard

the required position.

Adjust the protection guard 6 in such a manner that
sparking is prevented in the direction of the operator.

The  protection  guard  6  may  be  turned  only  upon
actuation of the release lever 1! Otherwise the power
tool  may  not  continue  to  be  used  under  any
circumstances  and  must  be  taken  to  an  after-sales
service agent.

Note:

The encoding keys on the protection guard

ensure

that only a protection guard that fits the machine type can
be mounted.

Protection Guard for Cutting

For cutting metal, always work with the protection
guard for cutting 7.

For cutting stone, always work with the cutting guide
with dust extraction protection guard.

The protection guard for cutting

is mounted in the same

manner as the protection guard for sanding

Auxiliary Handle

Operate your machine only with the auxiliary handle 4.