Walter Stauffenberg
GmbH & Co. KG
Im Ehrenfeld 4
D-58791 Werdohl
Phone +49 (0) 2392 916-0
Operating instructions PT-RF
V1.3
page 26 of 30
7.6 Set-Buttons
BAR <-> PSI
The reader can receive data in either Bar pr PSI. This setting can be
changed using this function. If a reader is set to PSI, the temperature is
always stored in °F. If reader is set to bar, temperature will be in °C.
The successful setting is confirmed with a feedback.
Set Time
This function set the current time of the PC to the reader.
Erase Memory
By using this function, the memory of the reader is emptied.
Restoring it again is not possible.
Sensor Naming
When using this button a sub menu will open. In this menu it is possible to
attach a name to a serial number. This function enables the naming of a
transmitter unique to a system of piece or
equipment. After clicking “Add
and Apply” in this menu the current list will be updated with the name used.
Time Format 12h
By clicking the 12h option in the settings menu the time format of the
results are changed from 24h mode to 12h mode. This also changes the
date format to US format.
Above the measuring table you find the information box, which informs
you about the setting.
