Walter Stauffenberg
GmbH & Co. KG
Im Ehrenfeld 4
D-58791 Werdohl
Phone +49 (0) 2392 916-0
Operating instructions PT-RF
V1.3
page 12 of 30
5.2 Individual measurement
Now carry out a measurement by pressing the
key once briefly.
The measured value will appear on the display within 0.5 s as shown below.
The measured value is stored in the memory of the reading device together
with temperature, ID, serial number and pressure zones.
(Conversion bar <-> psi /°C <-> °F is done by the software)
If no connection to the pressure transmitter was established, an error
message will appear on the screen. Ensure that the reading device is within
the reception area and then try again.
Display after successful individual measurement
Serial number
Measured value range
Type of measurement
Current pressure value
Sequential number/ID
Current temperature value
