![Staudte Hirsch SH-5.300 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/staudte-hirsch/sh-5-300/sh-5-300_instruction-manual_1367713004.webp)
/ 07
More information at
www.ivt-hirschau.de
/ 06
3 years
manufacturer’s warranty. Rechargeable batteries excluded.
Intended use
The LED Hand Lamp SH-5.300 by Staudte Hirsch is a lighting solution
for indoor and outdoor applications, which was designed for extreme
operational conditions. It is suitable for use as work lamp as well as
emergency lighting in industry, trade, public buildings, etc.
Scope of delivery
LED Hand Lamp SH-5.300
Charging Cradle
Plug-in power unit
Car charging adapter
Instruction manual
Safety and warning instructions
The following safety notes and hazard warnings serve for the protection
of both the device and your health. So please read the following points
thoroughly.
For safety and technical approval reasons (CE), any unauthorized
conversion and/or modification of the product is not permitted.
The SH-5.300 fulfils the requirements of the protection type IP 54
(complete protection against contact, dust depositing on the internal
surfaces and splashing water from any directions). This is why you should
never open the housing, as this protection may no longer be guaranteed.
To avoid eye injury, never look into the light source or do not point the
light beam in the direction of persons or animals.
The use of the product under unfavorable environmental conditions must
be avoided. Unfavorable environmental conditions include: ambient
temperatures above 50 °C, flammable gases, solvents, vapors, dust,
relative humidity in excess of 80 %, and moisture.
If there is reason to believe that safe operation is no longer possible,
the device must be switched off immediately and secured against
unintentional operation.
Service and repairs may only be carried out by authorized and qualified
personnel.
/ 04
/ 05
DE
5
4
3
2
1
LED Arbeitsleuchte SH-5.100
Artikel-Nr. 551000
Bestimmungsgemäße Verwendung
Die LED Arbeitsleuchte SH-5.100 von Staudte Hirsch dient der mobilen Beleuchtung
im Innen- und Außenbereich und wurde für den extremen Arbeitseinsatz konstruiert.
Sie eignet sich für den Einsatz als Arbeits- und Warnleuchte sowie als Notlicht.
Lieferumfang
LED Arbeitsleuchte SH-5.100
Ladeschale SH-5.900
Steckernetzteil
Kfz-Ladeadapter
Streuscheibe (orange)
Bedienungsanleitung
Sicherheits-/Warnhinweise
Die nachfolgenden Sicherheits- und Gefahrenhinweise dienen sowohl zum Schutz
des Geräts als auch zum Schutz Ihrer Gesundheit. Lesen Sie sich also bitte die folgen-
den Punkte aufmerksam durch.
Aus Sicherheits- und Zulassungsgründen (CE) ist das eigenmächtige Umbauen
und/oder Verändern des Produkts nicht zulässig.
Die SH-5.100 erfüllt die Voraussetzungen für die Schutzart IP 54 (Vollständiger
Berührungsschutz, Schutz gegen Staubablagerungen im Innern und Schutz gegen
Spritzwasser aus beliebigem Winkel). Öffnen Sie deshalb auf keinen Fall das
Gehäuse, da dieser Schutz danach unter Umständen nicht mehr gewährleistet ist.
Um Augenverletzungen zu vermeiden, blicken Sie nicht in die Lichtquelle oder
richten Sie den Lichtstrahl nicht auf Personen und Tiere.
Der Betrieb unter widrigen Umgebungsbedingungen ist zu vermeiden. Widrige
Umgebungsbedingungen sind: Umgebungstemperaturen über 50 °C, brennbare
Gase, Lösungsmittel, Dämpfe, Staub, Luftfeuchtigkeit über 80 % rel. Luftfeuchte
sowie Nässe.
Wenn anzunehmen ist, dass ein gefahrloser Betrieb nicht mehr möglich ist, so ist
das Gerät unverzüglich außer Betrieb zu setzen und gegen unbeabsichtigten
Betrieb zu sichern.
Servicearbeiten und Reparaturen dürfen nur von autorisiertem Fachpersonal
durchgeführt werden.
Durch unsachgemäße Handhabung oder Nichtbeachtung dieser Bedie-
nungsanleitung bzw. der hier aufgeführten Sicherheitshinweise erlischt
die Garantie. Für Sach-, Personen- und Folgeschäden, die dadurch ver-
ursacht werden, übernehmen wir keine Haftung.
Produktbeschreibung und Features
Die Staudte Hirsch LED Arbeitsleuchte SH-5.100 sorgt mit ihrer Doppel-Beam-Techno-
logie für eine intensive und gleichmäßige Ausleuchtung des Arbeitsbereichs. Sie besitzt
sowohl ein Flutlicht für die breite als auch ein Fokuslicht für die präzise Beleuchtung.
Features:
2 x 8 W Cree XHP50 LED mit 130 lm/W Spitzenlichtausbeute
5 verschiedene Leuchtmodi
8.000 mAh Li-Ion Akku
6 h Leuchtdauer bei voller, 11 h bei halber Leuchtstärke, 16 h im Blinklichtmodus
Bis zu 250 m Leuchtweite
Handliches und massives Gehäuse mit IP 54
Robuster, gummierter Tragegriff
Schwenkbarer Leuchtenkopf mit 110° Neigungswinkel
Magnetische Ablagefläche unterhalb des Leuchtenkopfs
Rutschfeste Standfläche
Bedienungs- und Anzeigeelemente:
Die SH-5.100 ist mit einem leicht bedienbaren Drehknopf ausgestattet, der auch mit
Handschuhen einfach zu benutzen ist. Darüber hinaus geben Ihnen 3 LEDs jederzeit
Auskunft über den Ladezustand des Akkus.
Ladezustands-
anzeige
Voll 100 %
Halb 50 %
Gering 25 %
Drehknopfschalter
6
Leuchtmodi
Aus
Flutlicht volle Leuchtstärke
Flutlicht halbe Leuchtstärke
Fokuslicht volle Leuchtstärke
Fokuslicht halbe
Leuchtstärke
Blinklicht (Flutlicht
bei halber Leuchtstärke)
1
2
3
4
5
6
Designed in Germany. Powered by IVT.
3 Jahre
Hersteller-Garantie. Akkus ausgeschlossen. Weitere Informationen unter
www.staudte-hirsch.de
In case of improper handling or non-observance of these
operating instructions or the safety notes stated herein, the
warrant/guarantee shall lapse. We do not assume liability for
any personal injury, damage to property or subsequent
damage that can be attributed to this.
GB
LED Hand Lamp SH-5.300
Article no. 553000
Product description and features
The Staudte Hirsch LED Hand Lamp SH-5.300 provides an intensive and even
illumination of your work space.
Features:
3 W Cree LED (225 lm)
2 Brightness levels (100 %, 50 %)
2,200 mAh Li-Ion battery
4,5 h duration of light at full,
9 h at half luminosity
Up to 150 m light range
Emergency light function
Robust flame-retardant housing, dust and
water-proof (IP 54)
128° Swivelabel lamp head
Rubberized push button switch
Metal mounting clip (back)
Charging status indicators
Magnetic lamp base
Slip-proof base
Charging cradle with charge control indicator
Rechargeable with 100 - 240 V AC power
supply or 12/24 V car charging adapter
Operation and display elements
The SH-5.300 is equipped with an easy-to-use push button switch, which can
also be used conveniently with gloves. In addition, 3 LEDs inform you about
the charging status of the rechargeable battery at any time.
Charging status indicators:
Low 25 %
Half 50 %
Full 100 %
Push button switch