9
MAINTENANCE
SPECIFICATIONS
MAINTENANCE
Your tool requires no additional lubrications or maintenance. There are no user serviceable
parts in your tool, battery pack or charger. Never use water or chemical cleaners to clean
your tool. Wipe clean with a dry cloth. Always store your tool in a dry place. Keep the motor
ventilation slots clean.
Depending on the processed material it is possible that the impact energy may decrease
during operation in «Hammer» mode (chiselling and demolishing and in «Hammer drilling»
mode. To restore the maximum impact energy it is necessary to reduce the revolutions by
decreasing the pressure on the switch trigger (6) until the advent of stable impact.
Before drilling large-diameter holes in metal, first drill a small pilot hole.
The rotary hammer is suitable for light-duty chiselling. Higher durability and efficiency can
be achieved only when using sharp chisels.
SPECIFICATIONS
The manufacturer reserves the right to make changes and improvements to the products and to
alter specifications without prior notice.
Model
MPB20
Rated voltage
20 V
Charger voltage
220-240V~50Hz
No load speed
0-1400 RPM
No load impact rate
0-4500 IPM
Impact energy
1.7 J
Drilling capacity (concrete)
22 mm
Weight
2.65 kg
А-weighted sound pressure level LpA
<85db(A)
А-weighted sound power level LwA
93 db(A)
Vibration emission value ah
5,7 m/s2
Includes
charger, battery (1 pc.), front handle,
instruction manual
EN
