6
EN
KNOW YOUR PRODUCT
KNOW YOUR PRODUCT
•
Use clamps or a vice to secure your work whenever possible.
•
Watch out for the initial torque reaction of the machine or upon jamming the drill bit.
Switch the power tool immediately upon jamming the drill bit. Watch out for high
reactive torque which may result in kick-back. The drill bit will block if the power tool is
overloaded or if the bit jams into the material.
•
Do not touch the drill bit or the processed part during operation and immediately after
that; they may be extremely hot. You may get serious burns.
•
Keep work area clean. Blends of materials are particularly dangerous. Dust from light
alloys can burn or explode.
•
Rags, cloths, cord, string and the like should never be left around the work area.
•
Always switch the machine off prior to leaving it down.
•
The tool must be used only for its prescribed purpose. Any use other than those
mentioned in this Manual will be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury resulting from such cases of
misuse.
•
To use this tool properly, you must observe the safety regulations, the assembly
instructions and the operating instructions found in this Manual. All persons who use
and service the machine have to be acquainted with this Manual and must be informed
about its potential hazards. Children and frail people must not use this tool. Children
should be supervised at all times if they are in the area in which the tool is being used.
It is also imperative that you observe the accident prevention regulations in force in
your area. The same applies for general rules of occupational health and safety.
•
The manufacturer shall not be liable for any changes made to the tool nor for any
damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with the tool’s construction and
design:
•
Damage to hearing if effective ear defenders are not worn.
•
Power tools must not be used outdoors in rainy weather, or in moist environment (after
rain) or in close vicinity with easily flammable liquids and gases. The working place
should be well lit.
1. SDS plus socket
2. Operation mode selector switch
3. Forward/reverse switch
4. Battery release button
5. Battery
6. ON/OFF trigger switch
7. Battery state indicator
8. LED light
9. Depth gauge
10. Charger
11. Battery state check button
12. Additional handle
