State Water Heaters SUF 100 150NE, Руководство по установке и эксплуатации

Страница: 2 / 32

2
Approx.
Input Liter
Model Kwh Capacity 17°C 22°C 28°C 33°C 39°C 44°C 50°C 56°C 61°C 67°C 72°C 78°C
SUF 60 120NE 37 227 1798 1348 1079 898 768 674 598 538 488 450 416 386
SUF 60 120PE 35 227 1726 1295 1037 863 738 647 575 519 469 432 397 371
SUF 100 150NE 44 379 2158 1616 1295 1079 924 810 719 647 587 538 500 462
SUF 100 150PE 44 379 2158 1616 1295 1079 924 810 719 647 587 538 500 462
SUF 100 199NE 59 379 2873 2154 1726 1438 1230 1079 958 863 784 719 662 617
SUF 100 199PE 59 379 2873 2154 1726 1438 1230 1079 958 863 784 719 662 617
SUF 100 240NE 70 379 3452 2589 2071 1726 1480 1295 1151 1037 939 863 795 738
Approx.
Input Gallon
Model BTU/Hr. Capacity 30 40 50 60 70 80 90 100 110 120 130 140
SUF 60 120NE 125,000 Nat. 60 475 356 285 237 203 178 158 142 129 119 110 102
SUF 60 120PE 120,000 L.P. 60 456 342 274 228 195 171 152 137 124 114 105 98
SUF 100 150NE 150,000 Nat. 100 570 427 342 285 244 214 190 171 155 142 132 122
SUF 100 150PE 150,000 L.P. 100 570 427 342 285 244 214 190 171 155 142 132 122
SUF 100 199NE 199,000 Nat. 100 759 569 456 380 325 285 253 228 207 190 175 163
SUF 100 199PE 199,000 L.P. 100 759 569 456 380 325 285 253 228 207 190 175 163
SUF 100 240NE 240,000 Nat. 100 912 684 547 456 391 342 304 274 248 228 210 195
These designs comply with the current edition of the American National
Standard for Gas Water Heaters, Volume III, ANSI Z21.10.3 / CSA 4.3 as
an automatic circulating tank water heater, and automatic storage water
heaters.
Detailed installation diagrams are found in this manual. These diagrams
will serve to provide the installer with a reference for the materials and
methods of piping necessary. It is highly essential that all water, gas
piping and wiring be installed as shown on the diagrams.
Particular attention should be given to the installation of thermometers at
the locations indicated on the diagrams as these are necessary for
checking the proper functioning of the heater.
In addition to these instructions, the equipment shall be installed in
accordance with those installation regulations in force in the local area
where the installation is to be made. These shall be carefully followed in all
cases. Authorities having jurisdiction should be consulted before installations
are made.
In the absence of local codes, the installation must comply with the latest
editions of the National Fuel Gas Code, ANSI Z223.1/NFPA 54 and the National
Electric Code, NFPA 70 . The former is available from the CSA International,
8501 East Pleasant Valley Road, Cleveland, OH 44131, and both documents
are available from the National Fire Protection Association, 1 Batterymarch
Park, Quincy, MA 02269.
FOREWORD
ROUGH-IN-DIMENSIONS
Table 1. RECOVERY CAPACITIES - NATURAL GAS / L.P .
Recovery capacities are based on heater performance at 94% thermal efficiency.
TEMPERATURE RISE - DEGREES °F - GALLONS PER HOUR
TEMPERATURE RISE - DEGREES °C - LITERS PER HOUR
GAS VALVE PIPING
SUF-120 1/2" NPT
SUF-150,
199 & 250 3/4" NPT