Starwood SA 315B Lama, Инструкция по сборке

Страница: 15 / 21

20
. Main Cabin Windows have been pre cut to approximate size although you will have to do
some minor fitting. Take your time and fit the windows carefully. As you fit the windows, use
masking tape to hold the glazing in place as you go along.
TAKE YOUR TIME!! Double
check all window edges again after you have everything taped in place. If all looks good, you
can start pre drilling screw holes with a .030 drill a few holes at a time and installing the 1/32
inch Phillips screws into the cabin rails. Work you way around the cabin structure while
checking fit of the window as you proceed. See Fig 18
Fig 18
Hints:
Install the center metal strip last. Use the same hole spacing as the center metal strip for
all you canopy screws. Only remove masking tape after area has been screwed down.
Door Windows
are taped to the door frame. Carefully mark with a water soluble marker the
outline of the door on the window. Remove window and carefully cut to exact outer shape of
the door frame. Reattach the window to the frame with masking tape and Drill and screw as per
instructions above.
Hint : Be careful when installing screws in window frames not to push down on the frame work
while installing glazing screws. This will tend to “flatten” out the curve of the door causing a
misfit when the door is fitted.
Pg 14