STARVILLE DMX Invader 2420 MK2, Руководство пользователя

Страница: 67 / 164

Enter the programming mode by holding down the [PROGRAM] button for 2 seconds. The LED
of the [PROGRAM] button flashes when the programming mode is activated.
Press the [ESC/CLEAR] button to abort a running programming.
Hold the [PROGRAM] button again for 2 seconds to exit the programming mode. The LED of
the [PROGRAM] button goes off then.
6.2.1 Programming a scene
1. Call up the programming mode.
2. The LED of the [FIXTURE] button should light up now. Otherwise, press the [FIXTURE]
button. Press the number buttons [1 – 20] to select one or multiple devices to be used to
create the scene.
To call any number of devices with consecutive numbers press the first and last
number button of the desired set of devices simultaneously.
Operating
DMX Invader 2420 MK2
67