STARVILLE DMX Invader 2420 MK2, Руководство пользователя

Страница: 26 / 164

4 STROBE
To trigger analogue strobes, that can't make use of the DMX signal. 12V .
5 AUDIO LINE IN
You can connect audio line signals (0,1 V ~ 1 V
pp
) to this RCA socket to be used for the sound-controlled mode. When
this switch socket is used, the built-in microphone is deactivated.
6 MIDI IN / MIDI THRU
Via the ‘MIDI IN’ socket, the device receives MIDI data. ‘MIDI THRU’ feeds the incoming MIDI data to the next MIDI
device.
7 DMX OUT
These two terminals send DMX signals to DMX capable devices. Use a cable with 3-pin XLR connectors to connect the
devices.
8 STAND ALONE
These ports are used only in master / slave mode. Use a cable with 5-pin XLR connector to 1/4" phone jack for the first
device, then the remote control of the first unit will also control the Stand by, Function and Mode function of all fur‐
ther devices.
Connections and operating elements
DMX controller
26