SV1110IPEXT Instruction Guide
21
This screen displays a system security log (see previous page), various system settings,
and the ability to generate a copy of the system configuration in plain text format.
Port Numbers
This table allows you to change
TCP port values for services
available on the SV1110IPEXT.
By default, they are factory-set
to common Internet values.
You may wish to enhance
security by disabling services
that you will not use with the
unit. To disable a service,
change its port number to
0
.
For flexibility, both the
LAN
and
WAN
ports can be configured separately. When you have made any necessary
changes, click
Commit Changes
to use the settings the next time the SV1110IPEXT
restarts. To force the unit to restart immediately, click
Restart Servers
.
Help! Menu
Provides a FAQ (Frequently Asked Questions) listing to assist you with the features and
operation of the SV1110IPEXT.
Copyright Menu
Provides the Terms of Use and other information related to the firmware and software on
the SV1110IPEXT.
Site map Menu
This menu provides a hyperlinked directory of each setting available on the Web
configurator.
Logout
Securely logs you out from your Web session on the SV1110IPEXT.
Using the Terminal Interface via Serial Port
The terminal interface you can access via the serial port permits the configuration of the
basic settings of the SV1110IPEXT. While not intended to be a substitute for the Web
interface, it does allow you to configure some of the same functions. The menu list
below describes the options that can be modified through the terminal interface.
Note that you must use the
W
option to confirm and apply any changes you made before
you exit the terminal session. If you changed the status of the Ethernet Bridging feature,
you will also need to power the SV1110IPEXT on and off again to enable your changes.
