SV1110IPEXT Instruction Guide
15
Takes you to the
Status
menu (see below).
SNMP agent setup and configuration
This menu allows you to configure the SV1110IPEXT so it can be recognized and
managed using industry-standard Simple Network Management Protocol
software.
RADIUS authentication setup
The RADIUS server requires the
IP address, the UDP port number
(1812 -
default
or 1645) and the
shared secret. The shared secret is
used to encrypt communications
and corresponds to a shared
password for the RADIUS server
and the client machine. Two
additional servers may be defined
for backup purposes. Each server
will be tried in order, using the
indicated number of retries and
timeout period, which are
configurable on the same page.
Remember to enable RADIUS after configuring it
. While RADIUS authentication is
enabled, the locally defined accounts on the KVM control over IP module will not be
used, except for the SSH login. However, if a user name of the form “name.local” is
given at the RADIUS prompt, the system will use “name”; check the password locally,
and skip RADIUS authentication. Delete all local accounts to avoid this behavior. When
connecting via VNC, a login screen is generated that asks for a RADIUS username and
password.
External Serial consoles setup and control
The StarTech.com Server Remote Control product line offers a number of additional
accessories that enhance the flexibility of this product. This screen (see next page)
allows you to view and manage these devices. For more information on accessories
available for the Server Remote Control, contact your local dealer or visit
www.startech.com for more information.
