7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Add the Felt Tape to the Front Plate
1.
Remove the
Adhesive Backing
from the
200 x 5 mm Felt
Tape
(x 2) and affix to the long edges of the inside of the
Display Frame
, located on the
Front Plate
. (Figure 2)
2.
Remove the
Adhesive Backing
from the
150 x 10 mm Felt
Tape
(x 2) and affix to the short edges of the inside of the
Display Frame
, located on the
Front Plate
.
Add the Foam Blocks to the Rear Plate
1.
Remove the
Adhesive Backing
from the
20 x 15 x 3 mm
EVA Pads
(x 4) and affix to the inside edge of the
Tabs
(x 4),
located on the inside of the
Rear Plate
. (Figure 3)
Figure 2
Front Plate
200 mm x 5 mm
Felt Tape
150 mm x 10 mm
Felt Tape
Adhesive Backing
Figure 3
Figure 4
20 x 15 mm x 3 mm
EVA Pads
100 x 25 mm
x 20 mm EVA
Pads
100 x 15 mm
x 12 mm EVA
Pads
