10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4.
Thread the
Small Washers
(x 3) over the
5 x 20 mm Self
Tapping Screws
(x 3) to complete the
Screw Assemblies
.
5.
Align the mounting holes, located on the
Angled Bracket
,
with the
Pilot Holes
, located
in the
Tabletop
.
6.
Insert the
Screw Assemblies
(x 3) through the
Angled
Bracket
and into the
Tabletop
and tighten, using a
Phillips
Head Screwdriver
. (Figure 8)
Mounting Option #2 - Tabletop - Rotating
1.
Place the
Angled Bracket
onto the intended mounting
location, on a
Tabletop
.
2.
Mark the location of the
Screw Hole
, located closest to the
front of the
Angled Bracket
, using a
Pencil
.
3.
Remove the
Angled Bracket
and drill an appropriately sized
Pilot Hole
in the
Tabletop
, using an
Electric Drill
.
4.
Thread a
Small Washer
over a
5 x 20 mm Self Tapping
Screw
to complete the
Screw Assembly
.
Figure 9
5 x 20 mm Self Tapping
Screw
Small Washer
Large Washers
