8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2.
(Optional) Remove the
Adhesive Backing
from the
100 x
25 x 20 mm Foam Blocks
(x 2) and affix next to the
Tabs
,
towards the center of the
Rear Plate
.
3.
(Optional) Remove the
Adhesive Backing
from the
100 x 15
x 12 mm Foam Blocks
(x 2) and affix along the inside edge
on the top and bottom of the
Rear Plate
. (Figure 4)
Insert the iPad into the Tablet Enclosure Assembly
1.
Insert the
Power/Data Cable
through one of the openings,
located in the rear/sides of the
Rear Plate
, and into the
iPad
.
(Figure 5)
2.
Place the
iPad
into the
Tablet Enclosure Assembly
, routing
the
Power/Data Cable
around the
EVA Pads
. Ensure the
Power/Data Cable
is routed without any sharp bends.
3.
Attach the
Front Plate
to the
Rear Plate
and
Lock
the
Tablet Enclosure Assembly
, using the
Key
. (Figure 6)
Figure 5
Figure 6
Charging
Cord
Front
Plate
Rear Plate
