Instruction Manual
2
IInnssttaallllaattiioonn
WARNING:
Hard drives require careful handling, especially when being
transported. If you are not careful with your hard disk, lost data may result.
Always handle your hard drive and storage device with caution.
WARNING
: Do not disconnect any cables or power sources while the hard drive
is active. This can result in data loss and possible damage to the hard drive.
WARNING
: Hard drives, like all computer equipment can also be severely
damaged by static electricity. Be sure that you are properly grounded before
opening your computer case or touching any components. StarTech.com
recommends that you wear an anti-static strap when installing any computer
equipment. If an antistatic strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the
computer case) for several seconds.
1. Unscrew the enclosure and remove
the rear panel cover. Pull the tray
out of the enclosure:
2. Place the 3.5” SATA drive in the tray,
with the hard drive SATA connector
facing the SATA connections
provided by the drive tray:
Hard Drive Installation
Rear Panel Cover
