Instruction Manual
2
Introduction
Packaging Contents
• Multimedia memory card reader - Micro USB On-The-Go
System Requirements
• OTG-enabled device (Smartphone, tablet, etc.)
Hardware Installation
1. Insert your desired memory card into the specified memory card slot on the
FCREADU2OTGB.
2. (Only required for USB peripheral devices) If connecting a USB peripheral device,
connect the USB cable for your peripheral device to the USB peripheral port on the
FCREADU2OTGB. Then Using a Micro USB cable (not included), connect the USB
power source port on the FCREADU2OTGB to an available USB power source.
Note:
The FCREADU2OTGB does not require a power source for standard card
reading operation.
