StarTech.com BR411BWDC, Инструкция по эксплуатации

Страница: 34 / 80

32
Active Wireless Client Table
Clicking on the “Show Active Clients” button brings up the Active Wireless Client Table.
This table shows you the status and information of all active wireless stations (i.e., your
wireless client PCs) that are connected to the wireless access point.
When you are finished examining the Active Wireless Client Table, click the Close
button. You can use the Refresh button to get the latest information.
Parameter Description
MAC Address
The MAC address of the active wireless station.
Tx Packet
The number of transmitted packets sent out from
the active wireless station.
Rx Packet
The number of packets received by the active wireless
station.
Tx Rate
The wireless station’s transmission rate in Mbits/sec.
Power Saving
Shows if the wireless client is in Power Save mode.
Expired Time
The time in seconds before disassociation. If the wireless
clients are idle longer than the Expired Time, the
wireless router will end the association. The wireless
client will have to re-associate with the wireless access
point when it becomes active again.