7
3.
Slide the
Grommet Clamp Plate (H)
over the end of the
Hand Screw
, completing the
Grommet Hand Screw
.
4.
Affix the
Rubber Pads (N)
(x5) to the side of the
Grommet
Base Plate (E)
that does not feature the
Peg
.
5.
Insert the
Grommet Base Plate Peg
, into the non-threaded
hole, located in the base of the
Pole (B)
and push to attach
the two pieces, completing the
Grommet Pole Assembly
.
6.
Align the
Grommet Pole Assembly
over the
Grommet
Hole
.
7.
Insert the
Grommet Hand Screw
through the bottom of the
Grommet Hole
and into the
Grommet Pole Assembly
and
tighten, by hand, until hand tight.
Attach the Swivel Arm (A) to the Pole Assembly
1.
Slide one or two
Cable Management Clips (D)
onto the
Pole Assembly
. (Figure 3)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 3
Tension
Adjustment
Screw