5
Installation
Note:
Do not overtighten any of the screws.
Pinch hazards!
Keep hands away from any pinch points
created by the mechanical components when moving the
arm assembly. Failure to do so may result in serious personal
injury.
Mounting Option #1 - Desk Mount
Attach the Pole (B) to the Mounting Surface
1.
Affix the
Rubber Pads (F)
to the
Desk Clamp (C)
. (Figure 1)
2.
Align the hole, located in the
Desk Clamp (C)
, with the hole
in one end of the
Pole (B)
. Ensure the
Desk Clamp Peg
is
aligned with the corresponding hole, located in the
Pole (B)
.
3.
Insert the
Pole Screw (G)
through the hole, located in
the top of the
Desk Clamp (C)
, and into the
Pole (B)
and
tighten, using the
6 mm Hex Key (J)
, to complete the
Desk
Pole Assembly
.
Figure 1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
