Startec S.R.L. Rain Star 260, Инструкция по программированию

Страница: 5 / 16

USER menu
4
3 Press _^_ or _>_ to increase the
value by a unit or a tenth
respectively at a time
- Press _v_ or _<_ to reduce the
value by a unit or a tenth
respectively at a time [
BRIGH
*
92
]
[
BRIGH
*
79
]
Higher value means more brightness.
Maximum value 99
Minimum value 0
4 Press _
ENTER _
to confirm the value
for brightness.
[
BRIGH 79
] - The asterisk disappears.
5 Press _v_ or _^_ to carry on moving through the menu for making any other changes. Press the
_
START _
key to save the changes you have made, or press the _
ESC _
key to cancel all the changes
(see § Saving changes or Cancelling changes). This stage takes you out of the menu.
Saving the changes
To save the changes which you have made to the Rain Star 260’s memory:
S
TAGE ACTION
DISPLAY NOTE
1 Press the START _
START _
key.
Press the START _
START _
key again
[
CHN SAVE
[
SAVES CH
]
Requests SAVE CHaNges
SAVES the CHanges
Once this operation is completed, the Rain Star 260 exits from the Menu and goes to the stage of
Cancelling changes
To cancel the changes which you have made:
S
TAGE ACTION
DISPLAY NOTE
1 Press the SCAPE _
ESC__
key.
Press the ESCAPE _
ESC__
key again
[
CANC CHN
]
[
CH N SAV
]
- requests CANCel CHaNges
- the CHanges are Not SAVed.
Once this operation is completed, the Rain Star 260 exits from the Menu and starts to work
The Rain Star 260 uses the metric system.