MANUFACTURER menu
14
[
PRS ENAB
] [
PRS
DIS
]
Opportunity to disable input of pressure sensor in case of failure. (always enabled)
Pressing _>_ takes you to a sub-menu with the following options
[
DSRA PRS
]
[
ENRA PRS
]
[
ENMA PRS
]
[
ENRU PRS
]
[
DSRA PRS
]
=>it DiSables the Reading by the Assistance. (does not appear on
assistance menu)
=>ENables Read by the Assistance
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
[
END ENAB
] [
END
DIS
]
Opportunity to disable input of sensor of rewinding end in case of failure. (always enabled)
Pressing _>_ takes you to a sub-menu with the following options
[
DSRA PRS
]
[
ENRA PRS
]
[
ENMA PRS
]
[
ENRU PRS
]
[
DSRA PRS
]
=>it DiSables the Reading by the Assistance. (does not appear on
assistance menu)
=>ENables Read by the Assistance
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
.Pressing _v_ takes you to a sub-menu with the following options
[
WRE O
“
]
Wait Rewinding End:
rewinding time in seconds after the impulde end sensor to complete the
gun cart reloading process.
Pressing _>_ takes you to a sub-menu with the following options
[
DSRA PRS
]
[
ENRA PRS
]
[
ENMA PRS
]
[
ENRU PRS
]
[
DSRA PRS
]
=>it DiSables the Reading by the Assistance.
(does not appear on assistance menu)
=>ENables Read by the Assistance
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
.Pressing _v_ takes you to a sub-menu with the
following options
[
IER 3.0
“
]
Elapsing time in seconds and tenths of seconds to
increase the speed of the gun cart restart.
[
UM METRE
] o
[
UM FEET
]
Units of measurement: decimal metric system. or, Imperial (US) measuring system. In this case the displays will relate
to the irrigation parameters (length of pipe and speed). The rest of the data in the menus remains expressed in the
decimal metric system.
[
LING ITA
] o [
LING
FRA
] o [
LING ING
]
o [
LING TED
]
LANGuage used for displays. Activated after saving data.
[
PWD ASST
]
Setting a new Assistance password (to be implemented)
[
SYSTEM
]
Parameters relating to configuration of the user interface.
Pressing _>_ takes you to a sub-menu with the following options:
[
MODE DIS
]
Pressing _>_ takes you to a sub-menu with the following options relating to some of the
DISplays
[
DIS METR
] o
[
DIS DECM
]
these options let you choose the displays of data for length and speed with or
without the decimal number.
[
D RID RT
] o
[
D STD TR
]
these options let you choose various Displays during Rapid Test and manual
control. The general default is RED
[
D ALT MM
] o
[
D STD MM
]
these options let you choose various Displays during Movement of the
Motors
[
MODE KEY
]
Pressing _>_ takes you to a sub-menu with the following options relating to the functionalities of
the keypad
